Elekta Steel Call Module reader installation

The Elekta Steel Call Module is supplied with a kit of parts that are used to either install the FDI 1104/951 Reader, or to blank the panel reader aperture if a reader is not being used. 

The contents of the kit of parts is as follows -




No reader being fitted.

To install this kit into an Elekta Call Module where a reader will not be used, use 4 x Screw 2 to fit the Reader Carrier Plate to the panel, then fit the Key Symbol Insert –


If no reader is being used it is suggested to not have the key visible to the front of the panel.

 

Using 4 x Screw 3, fit the back cover –




FDI reader being fitted.


To install this kit and the FDI 1104/951 (FD-020-166) reader into a panel, use 4 x Screw 2 to fit the Reader Carrier Plate to the panel –



The 1104/951 reader is supplied with a dedicated Key Symbol Insert that has a hole to align with the reader LED –



Fit this insert into the Reader Carrier Plate with the key symbol facing the front of the panel –


Remove the sensor –


Using 2 x Screw 1 secure the reader to the Reader Carrier Plate –


Re-fit the sensor –


Using 4 x Screw 3, fit the back cover –





     


T
Tony is the author of this solution article.

Did you find it helpful? Yes No

Send feedback
Sorry we couldn't be helpful. Help us improve this article with your feedback.