How do I cable a 2Voice 2 wire system with 1 main entrance and up to 32 blocks with 2 entrances per block?

This article will show you the type of cable and the cable distances required for installing a a 2Voice 2 wire system with 1 main entrance and up to 32 blocks with 2 entrances per block. There are two options here with a maximum distance from main panel to furthest power supply of 200M (Option 1) or 800M (Option 2).

IMPORTANT NOTE: If installing this type of system you should consider using the 2Voice IPerCom gateway. In this solution a 2 wire IP gateway can be installed making the entrance panels IP allowing for a more flexible installation whilst keeping a simple to install 2 wire riser. Block panels can be 2 wire or IP.

For more product information on the 2Voice IPerCom gateway click here

For more information on the 2Voice IPerCom solution click here




To find out more about the 2Voice 2 wire system click here


Below you can download the schematic drawing.

M
Mark is the author of this solution article.

Did you find it helpful? Yes No

Send feedback
Sorry we couldn't be helpful. Help us improve this article with your feedback.