IPerCom Door Code
There is the facility to have a Door Code on the IPerCom Call Module
You will need a create an Access Profile with the relevant door or doors which need to be opened by the code.
Open the Site configuration either from one of the IP Max Monitor or via the PC Program and Navigate to
Scroll down and Click on Add New
Add The door or doors which need to be controlled
Click OK and Select User
Door Code can be added to either a Resident or Non Resident. Non Residents are classed as anyone who does not live onsite however if a Door or Gate needs to be used by everyone onsite and a single regular change will be required then a single code can be used
Click on Add New
The default code length is 4 digits however this can be changed in the system settings.
The System will generate a random code however this can changed as required
Scroll down to allocate the correct access profile
Click on Link Edit Access Table
All Available Access Profiles will be displayed on the Left Hand Side
Click on the required Access Profile and this will move it to the Right Hand side and Click OK
Click OK again
Click in the System Setting
Scroll and find Key and Code Mode this should be set for Disable
Click on Project then Save and send the changes to the Site
The Code should now work
If a Code is required for a Trades then a time profile can be added so the code only work at a prescribed time.