How do I make an 1130/11 unit ring?

If you have a faulty handset that you are replacing with a new 1130/11 and you have issue with the new unit not ringing please ensure that you have connected as per the diagram below

If you have connected correctly proceed: -

1. Disconnect RZ

2. Get a colleague to press the call button outside (Keep it pressed until finished)

3. test voltage on the end of the RZ wire and on terminal No.6

If you do not have 12-18vAC on between the RZ wire and No. 6 terminal, the fault is not with the handset

L
Lee is the author of this solution article.

Did you find it helpful? Yes No

Send feedback
Sorry we couldn't be helpful. Help us improve this article with your feedback.