The Imago monitor has six buttons on the front and for the purpose of this guide they are
designated as follows –
- ‘Speak’ button
- ‘Key’ button
- Button with one dot Button 1
- Button with two dots Button 2
- Button with three dots Button 3
- Button with four dots Button 4
To turn on the answer service (ie turn the monitor off so it won’t ring) press Button 4.
The Key Button will be lit red – not flashing.
If a visitor calls you while the monitor is in this state they will get a message at the entry panel to tell them to leave a message.
When you want to turn the monitor back on (so that you can receive calls) press Button 4 again.
If someone has left a message the Key Button will flash (red).
To view messages –
Press the speak button
Press button 3 – you will now see the number of messages that have been left. Press button 3 again to begin viewing recorded messages.
To delete a message press and hold button 3 for 3 seconds. (You cannot delete a message without first viewing it).
To come out of the message service, press the speak button.
To conclude –
If the monitor has a steady red key then it is turned off and won’t ring.
If it has a flashing red key then there is one or more recorded messages.