POE device this needs to be connected to a full power POE network port, this needs to be connected to the LAN input port.
The BUS Out port needs to be connected to a 1039/20 Riser Power Supply Unit
Power On LED needs to be on this shows the 1039/50 has SIP registration to an IPerVoice Server.
Video test button - this is used to set the video level within the riser using the video adjustment on the 1039/20’s, this must be turned off for normal use.
This purpose of this device is to convert the SIP protocol on the LAN to a Riser Protocol for use in the analogue riser.
Basic Fault Finding:-
- Is the Power Light on if not check the cable between the 1039/50 an the POE Port
- No Video in Riser Check the video test button